Additional information
| Weight | N/A |
|---|---|
| Application Material | Tube |
| Max. Tube Capacity | 1 in sq |
| Max. Wall Capacity | 16 Gauge |
| Picket Style | Radius, Sharp |
Vogel's picket forming tool is the dependable way to quickly and easily turn square tubing into a spear-point picket.
Turn square tubing into a spear-point picket with Vogel’s depending, quick & easy picket tool. Our tools flattens and trims in one stroke! Adjustable guides help ensure your picket is square and straight.
Our standard tools are designed for one size of square tubing. Choose from:
- 1″ [also use on 7/8″]
- 3/4″ [also use on 7/8′ or 5/8″]
- 1/2″ [also use on 5/8″]
Maximum capacity is 16 gauge for steel tubing and 14 gauge for aluminum. Whichever size you select, you can purchase low-cost changeover parts to change your tooling to a different size.
Our spring-loaded tool fits most ironworkers and can be powered by Vogel’s low cost, 120 volt CSP-25-SA Power Unit.
PC75 / PC75R Specs
8″ left to right x 8-1/2″ front to back. 7-3/4″ shut height x 1-1/4″ stroke. Min. 15 tons. Slugs eject out the bottom of the tool, so clearance is required.
If you want to make pickets from heavier wall tubing, larger than 1″, or want a special picket shape, please contact us with your ideas!
When you add one of the tools to your cart, you will be asked to select what size you want the unit built for.
Turn square tubing into a spear-point picket with Vogel’s depending, quick & easy picket tool. Our tools flattens and trims in one stroke! Adjustable guides help ensure your picket is square and straight.
Our standard tools are designed for one size of square tubing. Choose from:
- 1″ [also use on 7/8″]
- 3/4″ [also use on 7/8′ or 5/8″]
- 1/2″ [also use on 5/8″]
Maximum capacity is 16 gauge for steel tubing and 14 gauge for aluminum. Whichever size you select, you can purchase low-cost changeover parts to change your tooling to a different size.
Our spring-loaded tool fits most ironworkers and can be powered by Vogel’s low cost, 120 volt CSP-25-SA Power Unit.
PC75 / PC75R Specs
8″ left to right x 8-1/2″ front to back. 7-3/4″ shut height x 1-1/4″ stroke. Min. 15 tons. Slugs eject out the bottom of the tool, so clearance is required.
If you want to make pickets from heavier wall tubing, larger than 1″, or want a special picket shape, please contact us with your ideas!
When you add one of the tools to your cart, you will be asked to select what size you want the unit built for.
Available Options:
Description
Turn square tubing into a spear-point picket with Vogel’s depending, quick & easy picket tool. Our tools flattens and trims in one stroke! Adjustable guides help ensure your picket is square and straight.
Our standard tools are designed for one size of square tubing. Choose from:
- 1″ [also use on 7/8″]
- 3/4″ [also use on 7/8′ or 5/8″]
- 1/2″ [also use on 5/8″]
Maximum capacity is 16 gauge for steel tubing and 14 gauge for aluminum. Whichever size you select, you can purchase low-cost changeover parts to change your tooling to a different size.
Our spring-loaded tool fits most ironworkers and can be powered by Vogel’s low cost, 120 volt CSP-25-SA Power Unit.
PC75 / PC75R Specs
8″ left to right x 8-1/2″ front to back. 7-3/4″ shut height x 1-1/4″ stroke. Min. 15 tons. Slugs eject out the bottom of the tool, so clearance is required.
If you want to make pickets from heavier wall tubing, larger than 1″, or want a special picket shape, please contact us with your ideas!
When you add one of the tools to your cart, you will be asked to select what size you want the unit built for.
1 review for Picket Forming Tool
What sizes of tubing can I form into pickets?
Our tooling will accept 1/2″ square minimum, 1″ square maximum. Thickness of 14 gauge [if aluminum] 16 gauge [if steel] to 18 gauge [either material]. The tool is set up for one size of square tubing and requires a changeover punch and die when changing tube sizes. Some sizes can be run with the same tooling, see chart below.
What do I need to make my own pickets?
You’ll need square tubing, a way to cut the tubing to your desired picket length (or purchase pre-cut), our picket forming tool and a press to power the tool.
What sizes of tubing can I form into pickets?
Our tooling will accept 1/2″ square minimum, 1″ square maximum. 14 gauge to 18 gauge. The tool is set up for one size of square tubing and requires a changeover punch and die when changing tube sizes. Some sizes can be run with the same tooling, see chart below.
Tube Size Gauge Use tooling for:
1/2″ square 14 ~ 18 1/2″
5/8″ square 14 ~ 18 3/4″
3/4″ square 14 ~ 18 3/4″
7/8″ square 14 ~ 18 1″
1″ square 14 ~ 18 1″
You show different shapes on your site, what should I get?
The sharp (PC75) and radius (PC75R) are our standard designs. You can buy either design and convert them later to the other style. We caution that many local building codes may restrict or ban the use of the sharp point design, for safety reasons. The radius tip is by far our most popular design. The other two designs with notched sides are custom-built. We may be able to other additional custom designs, so please fax or email us your ideas!
How many strokes does it take to smash, trim and form the picket?
Our tooling only requires one press stroke to create the picket from you cut to length square tube. Note that a small bit of scrap is created during the trimming of the tip shape, so you will actually need to cut your tubes slightly longer to compensate.
I don’t have a press to run your tooling in, can I operate in my Vogel Hand Press?
The tonnage required to form pickets exceeds what our hand press can generate. You will need our CSP-25-SA, a simple hydraulic power unit. This press is 110V, small enough to fit on a workbench, and has a foot switch to cycle the press each time you are ready to form a picket. With a $80.00 mounting adaptor, you can also use the power unit to run all the notching tooling that you currently operate with your hand press.
What do I do to form the horizontal rails to make a complete panel?
We offer three tools that can be used to pierce the rails. We offer two channel pierce tools (with different maximum capacities) and one tube piercing tool.
Richard Beatie –
Tool worked as expected. Company was great about info and product was shipped timely. Will definently use Vogel for future tooling and Larry was great as our salesperson.